We have an Onsrud 3-axis router in N51=160, with a 4x8 foot bed (add Z clearance)
The Onsrud has a 12-tool carousel and a vacuum table.
We also have a Shopbot Buddy 3/4 axis router in 3-410, with a 2x4 foot bed
The Shopbot tools must be installed entirely manually. It does not have a vacuum table.
The Shopbot does have a (rotary) 4th axis attachment that can be switched out with the 3/axis spoilboard.
The Intelitek is a small, low-speed 3/4 axis machine with about 12"x6" of working area and a set of steel fixturing tools /MDF spoilboard.
It has tool holders set up, which must be installed manually.
The Modelas are two small low-speed 3 axis machines designated for PCB copper circuit board milling.
Mastercam will be used to set up jobs on the Onsrud, Shopbot, and Intelitek. Mods are used for the Modelas. Please see their tutorial pages
for more info.
RESERVATIONS
HOURS
TUTORIALS